Preparation and investigation of transparent conducting aluminium-doped zinc oxide films prepared by sol-gel method for sensor application
By: Singh, Sukhmander.
Contributor(s): Singh, Prabhjot.
Publisher: New Delhi CSIR 2022Edition: Vol.60(6), Jun.Description: 529-538p.Subject(s): Humanities and Applied SciencesOnline resources: Click here In: Indian journal of pure & applied physics (IJPAP)Summary: Aluminium doped Zinc Oxide (AZO) thin films were prepared through chemical route using sol gel method at different annealing temperatures with three different concentrations of Al. It has been observed that on increasing in the annealing temperature, the crystallinity of the films improved. The XRD patters confirms the polycrystalline nature of the samples and found that increasing annealing temperature, increases the crystallinity of the films. The UV-vis spectroscopy analysis shows that, the band-gap decreases in all three concentration of Al ions in ZnO with temperature. The conductivity and the grain size increases with temperature. The band gap corresponding to the absorption decreases with increased annealing temperature.Item type | Current location | Call number | Status | Date due | Barcode | Item holds |
---|---|---|---|---|---|---|
Articles Abstract Database | School of Engineering & Technology Archieval Section | Not for loan | 2022-1793 |
Aluminium doped Zinc Oxide (AZO) thin films were prepared through chemical route using sol gel method at different annealing temperatures with three different concentrations of Al. It has been observed that on increasing in the annealing temperature, the crystallinity of the films improved. The XRD patters confirms the polycrystalline nature of the samples and found that increasing annealing temperature, increases the crystallinity of the films. The UV-vis spectroscopy analysis shows that, the band-gap decreases in all three concentration of Al ions in ZnO with temperature. The conductivity and the grain size increases with temperature. The band gap corresponding to the absorption decreases with increased annealing temperature.
There are no comments for this item.