000 | a | ||
---|---|---|---|
999 |
_c20193 _d20193 |
||
003 | OSt | ||
005 | 20231128143242.0 | ||
008 | 231128b xxu||||| |||| 00| 0 eng d | ||
040 |
_aAIKTC-KRRC _cAIKTC-KRRC |
||
100 |
_922222 _aNeggaoui, Hajar |
||
245 | _aUnderstanding the effects of thermal conditions on cellulose acetate‐based polymers | ||
250 | _aVol.33, Jun | ||
260 |
_aPrayagraj _bPushpa Publishing House _c2023 |
||
300 | _a83-95p. | ||
520 | _aThis research examined the relationship between cellulose acetate-poor and cellulose acetate-rich phases by measuring phase diagrams at different temperatures (10, 30, 50°C). In addition, FTIR and TGA were used to confirm the formation of cellulose acetate and to measure the mass change of this polymer. The scanning electron microscopy (SEM) analysis of films containing solvent/water/cellulose acetate and gelatin revealed a link between the structural morphology of cellulose acetate particles and the system temperature; the results show that an increase in temperature has an effect on the phase separation and surface morphology in the ternary system. Therefore, this paper is a contribution in the development of low-cost polymer materials with potential applications as flexible system in different fields such as building, security, environment, sport, and medical. | ||
650 | 0 |
_94626 _aMechanical Engineering |
|
700 |
_922223 _aEnnawaoui, Chouaib |
||
773 | 0 |
_x0973-5763 _tJP journal of heat and mass transfer _dPrayagraj Pushpa Publishing House |
|
856 |
_uhttp://www.pphmj.com/abstract/14964.htm _yClick here |
||
942 |
_2ddc _cAR |