000 | a | ||
---|---|---|---|
999 |
_c9303 _d9303 |
||
003 | OSt | ||
005 | 20190620085057.0 | ||
008 | 190620b xxu||||| |||| 00| 0 eng d | ||
040 |
_aAIKTC-KRRC _cAIKTC-KRRC |
||
100 |
_99295 _aMughal, Shaheen Beg |
||
245 | _aEstablishment of IHTC value of LM 13 and ADC 12 material for sand casting by FEM | ||
250 | _aVol. 8(3), Sep.-Dec | ||
260 |
_aNew Delhi _bSTM Journals _c2018 |
||
300 | _a1-6p. | ||
520 | _a For making a simple to very complex shaped product, sand casting is an inexpensive, useful and significant process. Throughout the process, Solidification plays an important role for making a sound and defect-less casting which was affected by different parameters like Interfacial Heat Transfer Coefficient, Casting Material & Shape, Mold Material, etc. For quality casting, industries trying to optimize solidification process by various methods. Present study shows the range of IHTC values opted for two different materials (LM 13 and ADC 12) at two altered locations inside the mould using Inverse Method with various simulations were performed to compare the results using designing and simulation software as well as the actual experiments. | ||
650 | 0 |
_94626 _aMechanical Engineering |
|
700 |
_99296 _aBarodiya, Dharmesh |
||
773 | 0 |
_tRecent trends in mechanical engineering & technology (TMET) _x2347-9965 _dNoida STM Journals |
|
856 |
_uhttp://engineeringjournals.stmjournals.in/index.php/TMET/article/view/862 _yClick here |
||
942 |
_2ddc _cAR |