Bottom collector isolation effect on the solar chimney performance
By: Meftah, M.S.
Contributor(s): Benhaoua, B | Khechekhouche, A.
Publisher: Prayagraj Pushpa Publishing House 2022Edition: Vol.26 April.Description: 27-40p.Subject(s): Mechanical EngineeringOnline resources: Click here to access online In: JP journal of heat and mass transferSummary: Abstract: An experimental investigation was carried out in the region of El Oued in the south-east of Algeria on a pilot assembly consisting of a chimney with a height of 3m and a black meta-absorption having diameter of 2m. The isolation effect between the collector and the ground, as well as the diameter effect of the collector and the chimney height, were studied. Temperature and air velocity are the two key effective parameters which were analyzed at different points of the collector and the chimney. As the result, an increase from 61.0 to 67.9°C in the temperature at the collector was obtained with an increase in the air speed from 1.3 to 1.8m/s. Also, it was revealed that a big difference in the quantities of produced electricity resulted. The effect of isolation has remarkably improved the electrical productivity from 1.7 to 1.9W as the maximum value. Keywords and phrases: solar chimney, isolation, collector temperature, velocity, electrical power.Item type | Current location | Collection | Call number | Status | Date due | Barcode | Item holds |
---|---|---|---|---|---|---|---|
Articles Abstract Database | School of Engineering & Technology Archieval Section | Reference | Not for loan | 2022-0980 |
Abstract:
An experimental investigation was carried out in the region of El Oued in the south-east of Algeria on a pilot assembly consisting of a chimney with a height of 3m and a black meta-absorption having diameter of 2m. The isolation effect between the collector and the ground, as well as the diameter effect of the collector and the chimney height, were studied. Temperature and air velocity are the two key effective parameters which were analyzed at different points of the collector and the chimney. As the result, an increase from 61.0 to 67.9°C in the temperature at the collector was obtained with an increase in the air speed from 1.3 to 1.8m/s. Also, it was revealed that a big difference in the quantities of produced electricity resulted. The effect of isolation has remarkably improved the electrical productivity from 1.7 to 1.9W as the maximum value.
Keywords and phrases:
solar chimney, isolation, collector temperature, velocity, electrical power.
There are no comments for this item.